Products from HSB-Normalien
high quality components
No results were found for the filter!
DIN 1530 form FA
Ejector blade form FA, nitrided
nitrided, with cylindrical head material: 1.2343 or 1.2344, start resistance min.600°C. shaft hardness: surface black//black oxidized, min. 950 HV. |Core strength min. 1400 N/mm². |head hardness: 50 ± 5 HRC
From €18.72
*
DIN 1530 form FAH
Ejector blade form FAH
hardened with cylindrical head|material: 1.2210 oder 1.2067 oder similar, start resistance min. 200°C. |head hardness: 45 ± 5 HRC, shaft hardness: 60 ± 2 HRC
From €14.05
*
DIN 172 form A
Drilling bush with collar
Material: Quality steel hardened 740-820 HV 10|
Form A: as drawn|
Form B: bore rounded at both ends|
Head tolerances head height k=-0,05|
head Diameter d²=-0,2|
From €2.10
*
DIN 179 form A
Drilling bush
Material: Quality steel hardened 740-820 HV 10|
Form A: as drawn|
Form B: bore rounded at both Ends|
From €1.59
*
DIN 2269
Test pin degree of accuracy II
Material: tool steel, HRC 60-64|Roundness: accuracy grade 2 = 1,0?
From €12.65
*
DIN 2269
Test pin degree of accuracy I
Material: tool steel, HRC 60-64|Roundness: accuracy grade 1 = 0,5?
From €12.77
*
DIN 6321 form B long
Reception and support bolt
Mat.: 1.8159 / 46 ± 2 HRC, |ca. DIN 6321
From €6.12
*
DIN 6321 form B short
Reception and support bolt
Mat.: 1.8159 / 46 ± 2 HRC, |ca. DIN 6321
From €6.04
*
DIN 6321 form C long
Reception and support bolt
Mat.: 1.8159 / 46 ± 2 HRC, |ca. DIN 6321
From €6.90
*
DIN 6321 form C short
Reception and support bolt
Mat.: 1.8159 / 46 ± 2 HRC, |ca. DIN 6321
From €6.81
*
Viewed